- Pure Copper: Made of 100% pure copper, soft and flexible, anti-rust
and durable to use.
- Size: 5 inches x 30 feet, rolled into one roll to save space.
- Protection: Weatherproof amd non-flammable, it can seals drain
holes well as well as ducts, air conditioners, vents etc.
- Easy to Use: This copper wire mesh can be used to plug holes of any
shape and size. Easy to cut, form and install.
- Applications: Great for holes cracks, pipes into siding and
foundation eaves, roof shingles, retractable awnings, behind signs,
can plug unwanted holes.
1. Copper mesh for pest control.
- Easy handling: We use 99.9% pure copper mesh, rather than copper
alloy. It is soft and can easily be cut into any size as needed,
with home use scissors. One of the best choices for DIY home rodent
control actions. It also can be used together with other products.
- Eco friendly: It won’t rust nor leave rust stains on brick or wood.
- Widely applicable: Yuan qiao Copper Mesh Can Repel bird, bat,
rodent, mouse, wasp, mice, rat, snail, slugs, snake, insect, etc.
- Nonflammable: The copper mesh is considered better than steel wool,
which easily gets fire.
- Position to use it: The copper wire mesh is used for openings, like
holes cracks, roof tiles, retractable awnings, behind signs, pipes
enter siding and foundation eaves.
2. Copper mesh for demister fabricating.
As a kind of knitted wire mesh, copper mesh can also be used to
make copper demisters, which are required in some special
occasions.
Copper Wire Type | Unit weight | Specific area for same length copper mesh | Specific area for same weight copper mesh |
Round wire Φ0.16mm | a | b | c |
Round wire Φ0.23mm | 2.06a | 1.44b | 0.69c |
Flat wire 0.1*0.4mm | 1.99a | 1.99b | c |
3. Copper gauze for screw cleaning.
Steps to clean the screws and barrels efficiently with copper gauze
and grease.
Step 1: Use a purging compound to clean the extruder. Then use small ball
of copper mesh with some silicone grease on it to clean the die
face. Also please clean the valve when it is still hot.
Step 2: Remove the die from the extruder head. It is best to clean it by
silicone coated copper gauze forced through the die with a wooden
dowel.
Step 3: Pull back and forth the copper gauze to complete the cleaning
after it pass through the die.
Step 4: Make sure that no residual trace of adhered plastic is left, nor
causing a scratch on the metal surface, so the die is thoroughly
clean.
Step 5: Remove the hot screw partly, wrap the copper gauze with silicone
coating 3 times around the screw, pull back and forth to do the
cleaning.
Step 6: Keep sliding the copper gauze when removing the screw out of
barrel slowly, until the screw is clean. It takes only 5 minutes
for step 5 and 6 operations.
Step 7: Wrap copper mesh at end of a long rod and pass it through the
barrel. Then, chuck the rod into power drill, insert fresh gauze
and pass back and forth through barrel until clean.
Step 8: Please do all the operations with silicone grease coated copper
mesh. Now all parts is clean and ready for reassemble.
